XWorkplace

XWorkplace 1.0.16 README (C) Ulrich M”ller, Feb 7, 2000 Last updated 2018-12-26 0. CONTENTS OF THIS FILE ======================== 1. INTRODUCTION 2. REQUIREMENTS 3. INSTALLATION 4. UPGRADING 5. NATIONAL LANGUAGE SUPPORT 6. GETTING STARTED 7. LICENSE, COPYRIGHT, DISCLAIMER 8. CONTACT 1. INTRODUCTION =============== Welcome to XWorkplace V1.0.16. XWorkplace is a complex set of replacement classes for the OS/2 Workplace Shell to enhance the WPS's behavior in many ways. XWorkplace comes in two flavors: the classic XWP Full version with all features and endless configuration options, or the newer Lite version that's preconfigured with the best of XWP. Most ArcaOS and eComStation installations include customized versions of XWP Lite, known as "ArcaDesktop" and "eWorkplace". Contact the respective vendor for updates to those versions. This README has additional information which is not included in the XWorkplace User Guide. Please read through all of this before installing. After installation, you can find this README in the main install directory. About this release ------------------ This release from the SVN 1.0 branch includes all enhancements and bugfixes currently available. For details, refer to the "Version Notices" in the "XWorkplace User Guide". To extract the documentation only, see "3. INSTALLATION" below. 2. REQUIREMENTS =============== XWorkplace is currently developed and tested under ArcaOS but should work with any of these versions of OS/2: -- Warp 4 FP 15 -- WarpServer for e-Business -- Merlin/Aurora Convenience Packages -- eComStation v1.x / v2.x -- ArcaOS v5.x Features that rely on ACPI (e.g. power-off or CPU temperature) require the system to use a compatible version of 'ACPI.PSD'. 3. INSTALLATION =============== XWorkplace must be installed using WarpIN. After all files have been copied, WarpIN will restart your Workplace Shell to make sure the changes become active. A reboot should not be necessary. The .WPI archive is structured as 3 packages: the "XWP kernel", language-support files, and documentation. While you would normally install all 3, you can choose just documentation or only language-support if desired. Some WARNINGS: -- In any case, before installing, MAKE A WPS BACKUP. -- It was reported that the Workplace Shell hangs after a restart if you have "Automatic lockup on startup" enabled. If so, disable that setting before allowing WarpIN to restart the WPS. 4. UPGRADING ============ An upgrade requires the WarpIN installer to replace files that are currently in use. When it asks about locked files, be sure to select "Unlock (DosReplaceModule)". If it reports that 'xwpdaemn.exe' is running and must be killed, allow it to do so. Should you get prompted that a .HLP file is locked, opening and closing WPS help will unlock it: click on the Desktop then press F1. Warning: killing 'xwpdaemn.exe' has the unfortunate side-effect of making all your XWorkplace Startup Folders start if you accept WarpIN's offer to restart the desktop at the end of installation, even if they are set to start on reboots only. If this is a problem, decline the offer to restart the Desktop, and reboot manually after installation has completed. If upgrading doesn't work, have WarpIN remove the installed XWorkplace version first, restart the WPS, and then install the new version. Upgrading ArcaDesktop and eWorkplace ------------------------------------ You may want to contact your vendor for their customized upgrade before installing a generic version of XWorkplace. If you choose to proceed, you can install either XWP Lite to get a comparable set of features or XWP Full for all features. Be aware that the icons and titles of some XWP objects may change. 5. NATIONAL LANGUAGE SUPPORT ============================ Xworkplace (Full and Lite) is currently distributed in seven NLS versions: German, Dutch, Italian, Japanese, Spanish, Russian, and English. To change your installation's language, reinstall using the desired NLS version but only select the language-support package. If you've installed XWP Full, you can use its "XWorkplace Setup" object to select any of the installed languages. Note: additional NLS versions containing only language-support files may be available from 3rd-parties. 6. GETTING STARTED ================== XWorkplace Full users should open the "XWorkplace Setup" object first. Go to the "Features" page to explore and enable XWorkplace. XWorkplace Lite comes preconfigured with most features enabled. For both versions, most settings are integrated into WPS objects in the System Setup folder; additional options can also be found in the pages of the Desktop's Properties notebook. 7. LICENSE, COPYRIGHT, DISCLAIMER ================================= Copyright (C) 1997-2021 Ulrich M”ller, Martin Lafaix, Paul Ratcliffe, Rich Walsh, and others. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as contained in the file COPYING in the installation directory. The full source code is available. See XFLDR001.INF for details. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. For details, refer to the "Notices" section in XFLDR001.INF. 8. CONTACT ========== We have created two mailing lists at netlabs.org for contact. Please use these lists for general discussion about XWorkplace: For XWorkplace users: xworkplace-user@netlabs.org For XWorkplace developers and those who are interested: xworkplace-dev@netlabs.org For details, see "Notices" --> "Contact" in XFLDR001.INF. A bugtracker for XWorkplace is available at http://xtracker.netlabs.org Please use that beast for reporting bugs instead of posting them to the mailing lists. Thank you.

XWorkplace 1.0.16 LEESMIJ (W) Ulrich Möller, Feb 7, 2000 Laatste wijziging: 2011-11-18 0. INHOUD VAN DIT BESTAND ======================== 1. INTRODUCTIE 2. BENODIGHDHEDEN 3. INSTALLATIE 4. BIJWERKEN 5. TAAL ONDERSTEUNING 6. BEGINNEN 7. LICENTIE, AUTERURSRECHT, VERANTWOORDELIJKHEID 8. KONTAKT 1. INTRODUCTIE ============== Welkom bij XWorkplace V1.0.16 XWorkplace is een complexe geheel van vervangings classes voor de Workplace Shell van OS/2 om het gedrag van de WPS in veel opzichten uit te breiden. Dit LEESMIJ bestand bevat veel extra informatie die niet is te vinden in de XWorkplace Gebruikers handleiding. Lees dit LEESMIJ bestand a.u.b. voor installatie door. Na de installatie vindt u dit LEESMIJ bestand in de hoofd installatie directory van XWorkplace. Over deze vrijgave ------------------ Dit is de eerste vrijgave vanuit de 1.1 boom met daarin de bugfixes die verzameld zijn sinds de laatste 1.0 vrijgaves. Voor details, kijk in de "Version Notices" in de "XWorkplace Gebruikers handleiding". Om alleen de documentatie te installeren, zie "3. INSTALLATIE" hieronder. 2. BENODIGHEDEN =============== XWorkplace is ontwikkeld en getest onder eComStation. Opm.: In tegenstelling tot de eerdere vrijgaves zullen XWorkplace 1.0.0 en hoger NIET LANGER werken op OS/2 Warp 3. DUS PROBEER HET NIET TE INSTALLEREN OP WARP 3. Er zijn ook meldingen van XWorkplace problemen met Warp 4 als de laatste fixpacks niet zijn geïnstalleerd, maar dat is nog niet het test team bevestigd. De volgende OS/2 versies zijn veilig, omdat zij zijn gebaseerd op ruwweg dezelfde IBM code: -- Warp 4 FP 15 -- WarpServer voor e-Business -- Merlin/Aurora Convenience Packages -- eComStation 1.x / 2.x XWorkplace 1.0.4 en hoger leveren toegang tot extra informatie over stuurprogramma's. De volgende benodigdheden zijn van toepassing: -- Het CFGDAT.INF bestand uit het ConfigTool freeware pakket moet aanwezig zijn in een directory van een pad dat is opgegeven in de BOOKSHELF omgevingsvariabele in de CONFIG.SYS. -- De uigebreide help weergever NewView moet geïnstalleerd zijn of als een complete vervanging van VIEW.EXE of als een alleenstaand programma met het uitvoerbare bestand in een PATH en de DLL aanwezig in het LIBPATH statements. 3. INSTALLATIE ============== XWorkplace moet m.b.v. WarpIN worden geïnstalleerd. Nadat alle bestanden zijn gekopieerd, zal Warpin de Workplace Shell opnieuw starten om er zeker van te zijn dat alle wijzigingen actief worden. Herstarten zal niet nodig zijn. Als u op dit moment nog niet weet of u XWorkplace wilt gebruiken, kunt ook alleen het "Documetation" package selecteren uit het archief. Op deze wijze kan eerst de documentatie van XWorkplace gelezen worden en kan besloten worden om alsnog alles te installeren. Om het later te installeren, klik dan simpel weg opnieuw op de .WPI van het XWorplace archief. Enige WAARSCHUWINGEN: -- MAAK, voor de installie, in ieder geval EEN BACKUP VAN DE WPS. -- Er is gemeld dat de Workplace Shell zichzelf 'ophangt' na het herstarten als u de "Automatisch vergrendelen bij opstarten" instellingen heeft ingeschakeld. In dat geval, schakel deze instelling uit voor dat WarpIN de WPS mag herstarten. Installeren op eComStation -------------------------- Als u xWP installeert op eComStation, weet dan dat eCS een speciale versie van XWorkplace bevat die conflicteert met de 'losse' versie. Doe een van de volgende dingen: * Installeer deze vrijgave van XWorkplace over de versie die zit in eCS heen -- d.w.z., als WarpIN u vraagt naar de doel directory geef dan op: ?:\ecs\system\ewps (? uw opstart station). Merkop dat dit de versie die in eCS zit, zal overschrijven en dat dat niet eenvoudig kan worden hersteld. * Als alternatief, verlaat nu deze XWorkplace installatie en de-installeer eerst de eCS versie door het uitvoeren van ?:\ecs\system\ewps\install\deinst.cmd Herstart uw werkplek (of herstart de PC), en installeer dan XWorkplace in een willkeurige directory. 4. BIJWERKEN ============ Bijwerken vanuit XWorkplace --------------------------- BELANRIJK: Als u installeert terwijl de WPS draait (wat het meest waarschijnlijke is), zal WarpIN u bevestigingsdialogen laten zien over de bestanden die momenteel in gebruik zijn, als meest belangrijke, XFLDR031.DLL. Dat is normaal omdat die modules worden geladen als de WPS (en dus XWorkplace) draait. In deze dialogen, MOET u "Unlock (DosReplaceModule)" selecteren, anders wordt uw installatie niet volledig bijgewerkt. Als u dit bericht krijgt voor een help bestand (.HLP uitbreiding), wordt het help bestand van XWorkplace open gehouden door de WPS. Helaas is het met OS/2 niet mogelijk om gegevens bestanden automatisch te ontkoppelen (unlock). Om het helpbestand te ontkoppelen, terwijl de 'gekoppeld' dialoog wordt getoond, open een standaard WPS help venster (bijv. door op een lege plek op de werkplek te klikken en F1 in te drukken), dit zal het XWorkplace help bestand ontkoppelen. Daarnaast krijgt u waarschijnlijk een informatie bericht dat de XWPDAEM.EXE draait en dat die gesloten moeten worden. Laat WarpIN dat programma sluiten (dat is de XWorkplace Daemon). Dit is het ongelukkige neven effect dat al uw 'XWorkplace Opstart' mappen, starten als u accepteert wat WarpIN aanbiedt het starten van de werkplek aan het einde van de installatie, zelfs als zij zijn ingsteld om alleen te starten bij het herstarten. Als dit een probleem is, moet u het aanbod om de Werkplek opnieuw te starten weigeren, en u moet handmatig herstarten nadat de installatie gereed is. Als het bijwerken niet werkt, laat dan WarpIN de geïnstalleerde XWorkplace versie eerst verwijderen, herstart de WPS en installeer dan de nieuwe versie. Bijwerken vanuit XFolder ------------------------ XWorkplace is de opvolger van XFolder V0.85. XWorkplace en XFolder kunnen niet samenwerken, omdat XWorkplace alle mogelijkheden bevat van XFolder 0.85 plus veel bugfixes en zelfs meer mogelijkheden. Met als resultaat, als XFolder is geïnstalleerd, XWorkplace uw XFolder installatie zal uitschakelen. Toch moet u XWorkplace in een ANDERE directory installeren dan de bestaande XFolder directory om er zeker van te zijn dat geen bestandsconflicten ontstaan. Verscheidene mensen hebben laten weten dat het installeren in dezelfde directory de WPS kan laten hangen XWorkplace kan uw bestaande XFolder 0.85 instellingen, indien aanwezig overnemen. U zal daar tijdens de eerste WPS herstart na de installatie om worden gevraagd. Echter er zijn veel nieuwe instellingen bijgekomen, dus veel zal worden uitgeschakeld. Als u prefereert om later terug te gaan naar uw bestaande XFolder installatie (uiteindelijk, is dit een ontwikkelaars vrijgave), laat WarpIN dan XWorkplace de-installeren en installeer XFolder weer door het gebruik van het INSTALL.CMD in uw XFolder directory. Uw oude XFolder instellingen worden door XWorkplace niet beïnvloed 5. TAAL ONDERSTEUNING ===================== Dit archief bevat alleen de taal ondersteuning voor Nederlands, een paar uitzonderingen daar gelaten die nog niet vertaald zijn. Andere talen zijn te vinden op: ftp://ftp.netlabs.org/pub/xworkplace/nls 6. BEGINNEN =========== Open in ieder geval, na installatie, eerst het nieuwe "XWorkplace Instellingen" object en ga naar de "Kenmerken" pagina. Dit is de meest centrale plaats om de mogelijkheden van XWorkplace in te schakelen. Klik op de "Help" toets voor meer informatie. 7. LICENTIE, AUTERURSRECHT, VERANTWOORDELIJKHEID ================================================ Auteursrecht (C) 1997-2021 Ulrich Möller, Martin Lafaix, Paul Ratcliffe, Rich Walsh, en anderen. Dit programma is gratis; u kan het distribueren en/of verbeteren onder de condities van de "GNU General Public License" zoals opgenomen in het bestand " COPYING in de installatie directory. De volledige broncode is beschikbaar. Zie XFLDR031.INF voor details. Dit programma wordt gedistribueerd in de verwachting dat het bruikbaar is, maar ZONDER ENIGE GARANTIE; zonder zelfs de daaronder begrepen garantie van VERKOOPBAARHEID of GESCHIKTHEID VOOR EEN BEPAALD DOEL. Voor details, ga naar de "Notices" sectie in XFLDR031.INF. 8. KONTAKT ========== Er zijn twee "mailing lists" gemaakt op netlabs.org voor kontakt. Gebruik deze 'lists' a.u.b. voor algemene discussies over XWorkplace: Voor XWorkplace gebruikers: xworkplace-user@netlabs.org Voor XWorkplace ontwikkelaars en ander belangstellenden: xworkplace-dev@netlabs.org Voertaal in beide 'lists' is Engels. Voor details, zie "Notices" --> "Contact" in XFLDR031.INF. Een bugtracker voor XWorkplace is beschikbaar op: http://xtracker.netlabs.org Gebruik deze mogelijkheid om bugs te rapporten inplaats van ze te plaatsen in de "mailing lists". Bij voorbaat dank.

README.NLS - 日本語 (C) 2008 Alex Taylor INTRODUCTION このフャイルは XWorkplace の日本語の国籍言語のサポートを 含んでいます。 [まだ日本語で書かれません。] The original Japanese XWorkplace translation was done by Jun Mikami and can still be found at <http://www.geocities.co.jp/SiliconValley/1300/>. It does not appear to have been updated since version 1.0.1, however. Using these sources, I have updated it for XWorkplace 1.0.9. This mostly involved reorganizing the file contents slightly, but it did require the addition of a handful of new strings. (My Japanese is limited, so they may be slightly strange, but I tried to do my best.) KNOWN PROBLEMS AND LIMITATIONS At present, only the language DLL, the message file, and object creation are available in Japanese. The following are all still in English: * The help file and documentation (although I did update a couple of the more language-critical screenshots) * The WarpIN installer text. * The text used in the XFix utility. * The driver descriptions used in the Kernel object. * The WPS class descriptions used in the Class List object. * The README and README.NLS files. There is some slight text clipping visible in the WPS class list. As well, the vertical spacing in various dialogs will tend to be rather crowded if you have the desktop's default dialog font set to a smallish value like 9.WarpSans or 8.Helv. When the XPager is first enabled (or immediately following a reinstall), the desktop IME controls may not become "sticky" until you reboot. XWorkplace automatically sets the font on most of its dialogs to 9.WarpSans, instead of using the desktop's default dialog font. This means that DBCS glyphs will be displayed using Presentation Manager's automatic glyph substitution, instead of the "Combined" font glyphs. I have not observed any problems with this, but it is possible that it could affect the display quality of glyphs under some situations. You may see some garbled text in the Trash Can folder immediately after it is first created. As far as I can tell, this should go away once you reboot. REQUIREMENTS You should use this NLS package under the Japanese DBCS version of OS/2, with codepage 932 as the default. It will install and run under SBCS versions (like US English), but none of the Japanese text will be readable (unless you take some special and rather unorthodox steps which are really not recommended).

XWorkplace 1.0.16 README für deutsche Sprachunterstützung (W) Christian Hennecke, 6. Dezember 2006 Zuletzt aktualisiert am 16. März 2008 0. INHALT DIESER DATEI ====================== 1. EINFÜHRUNG 2. ERFORDERNISSE 3. INSTALLATION 4. BEKANNTE PROBLEME UND EINSCHRÄNKUNGEN 5. DOWNLOAD UND QUELLTEXT 6. LIZENZ, COPYRIGHT, HAFTUNGSAUSSCHLUSS 7. KONTAKT 8. MITWIRKENDE PERSONEN 9. UNTERSTÜTZUNG UND SPENDEN 1. EINFÜHRUNG ============= Dieses Archiv enthält die deutsche Sprachunterstützung (NLS) für XWorkplace 1.0.16. Dieses LIESMICH.NLS umfaßt zusätzliche Informationen, die nicht im XWorkplace-Benutzerhandbuch enthalten sind. Lesen Sie bitte all dies vollständig durch, bevor Sie mit der Installation beginnen. Nach der Installation finden Sie dieses LIESMICH.NLS im Haupt- Installationsverzeichnis. Wenn Ihnen dieses Produkt zusagt, ziehen Sie bitte in Betracht, die Weiterentwicklung zu unterstützen. Weitere Informationen erhalten Sie im Abschnitt "9. Unterstützung und Spenden". Hinweis: Die deutsche Sprachunterstützung für XWorkplace ist absichtlich nach den Regeln der alten Rechtschreibung verfaßt worden, um ein konsistentes Erscheinungsbild zusammen mit den übrigen OS/2-Teilen zu gewährleisten. 2. ERFORDERNISSE ================ Dieses Sprachpaket erfordert ein installiertes XWorkplace 1.0.9. D.h. das XWorkplace-Basispaket muß entweder bereits installiert sein oder mit diesem Paket installiert werden. 3. INSTALLATION =============== Das Sprachpaket muß mit WarpIN installiert werden. Nachdem alle Dateien kopiert wurden, wird WarpIN die Workplace Shell neu starten, damit die Änderungen aktiv werden können. Ein Neustart des Systems sollte nicht notwendig sein. Wenn Sie sich derzeit noch nicht sicher sind, ob Sie XWorkplace benutzen sollten, können Sie nur das Paket "Dokumentation" auswählen. Auf diese Weise können Sie zuerst die Dokumentation von XWorkplace durchlesen und dann entscheiden, ob Sie es wirklich vollständig installieren wollen. Um es zu einem späteren Zeitpunkt zu installieren, doppelklicken Sie einfach nochmals auf das WarpIN-Paket für XWorkplace. Auf der letzten Seite "System Configuration" kann festgelegt werden, ob WarpIN auch die WPS-Objekte, die XWorkplace angelegt hat, auf die deutsche Sprachversion umstellen soll. Aktivieren Sie dazu die Option "Create WPS objects". Beachten Sie dazu Punkt 1 unter "Bekannte Probleme". Sie können dies auch später nachholen, indem Sie das REXX-Skript "instl049.cmd" im Unterverzeichnis "install" des XWorkplace-Installationsverzeichnisses ausführen. Bei der Installation wird das deutsche Sprachpaket automatisch aktiviert und steht nach einem Neustart der WPS zur Verfügung. 4. BEKANNTE PROBLEME UND EINSCHRÄNKUNGEN ======================================== 1. Aus Konsistenzgründen wurde die Kennung des deutschen Sprachpakets geändert. Dies führt dazu, daß Einträge für ältere Versionen nach der Installation in der WarpIN-Datenbank verbleiben. Diese können aus der WarpIN-Datenbank entfernt werden. 2. Bei der Umstellung des Konfigurationsordners auf die deutschen Objekttitel gehen bestehende persönliche Einstellungen wie zusätzliche Menüeinträge i.a. verloren. 3. Wird die Sprachversion über das Objekt "XWorkplace-Konfiguration" geändert, so kann es vorkommen, daß das XCenter dies nicht wahrnimmt und infolgedessen Einträge in der vorher eingestellten Sprache zurückbleiben. Dies läßt sich durch Schließen und erneutes Starten des XCenters beheben. 4. Beim Treiberkonfigurationsdialog für JFS, der auf der Seite "Treiber" des Objekts "OS/2-Kernel" aufgerufen werden kann, sind die Texte derzeit noch fest in der Datei d_cdfs.dll verdrahtet. Nach der Installation dieses Paketes kann die englische Version nur durch Ersetzen der Datei durch die ursprüngliche Version wiederhergestellt werden. 5. DOWNLOAD UND QUELLTEXT ========================= Aktuelle Versionen des Sprachpakets kann man über folgende URL beziehen: ftp://ftp.netlabs.org/pub/xworkplace/nls/ Der Quelltext ist als Teil des XWorkplace-CVS-Archivs bei Netlabs verfügbar (Unterverzeichnis 049). Hinweise zur Nutzung dieses Archivs finden Sie unter http://www.xworkplace.org/cvs.html. Diese Version ist mit folgendem Tag markiert: chennecke_0001_1-0-8 6. LIZENZ, COPYRIGHT, HAFTUNGSAUSSCHLUSS ======================================== Copyright (C) 2002-2004 Christian Hennecke, Thomas Klein, Ulrich Möller, Michael Riethdorf, Peter Weilbacher und andere. Copyright (C) 2005-2008 Christian Hennecke Dieses Programm ist freie Software; Sie können es unter den Bedingungen der GNU General Public License, wie in der Datei COPYING im Installationsverzeichnis enthalten, weiterverbreiten und/oder modifizieren. Der Quelltext ist vollständig verfügbar. Siehe XFLDR049.INF für Details. Dieses Programm wird in der Hoffnung vertrieben, daß es nützlich ist, aber OHNE JEDWEDE HAFTUNG und ohne implizite Garantie der MARKFÄHIGKEIT oder der BENUTZBARKEIT FÜR EINEN BESTIMMTEN ZWECK. Details entnehmen Sie bitte dem Abschnitt "Hinweise" in XFLDR049.INF. 7. KONTAKT ========== Sollten Sie Verbesserungsvorschläge in Bezug auf die Übersetzung haben, Fehler darin finden oder bei der Übersetzung helfen wollen, senden Sie uns eine Nachricht. Melden Sie sich auch, wenn alles zu Ihrer Zufriedenheit funktioniert! Benutzen Sie dazu bitte die Mailingliste XWorkplace-User bei Netlabs: xworkplace-user@netlabs.org. Details zur Anmeldung und Nutzung alternativer Benutzerschnittstellen finden Sie unter: http://www.xworkplace.org/contact.html http://wiki.netlabs.org/wiki/wiki.phtml?title=Mailinglists Falls Sie Probleme mit der englischen Sprache oder Schreibfehler gefunden haben, können Sie sich an Christian Hennecke unter der E-Mail-Adresse christian.hennecke@os2voice.org wenden. Beachten Sie, daß unter dieser Adresse KEIN allgemeiner kostenloser Support für XWorkplace und OS/2 geleistet werden kann! 8. MITWIRKENDE PERSONEN ======================= Pflege des Sprachpakets ----------------------- Christian Hennecke, christian.hennecke@os2voice.org Erste vollständige Übersetzung ------------------------------ Frank Berke - Übersetzung Online-Hilfe Christian Hennecke - Koordination; Übersetzung Dialogressourcen, Handbuch, Online-Hilfe, README; Korrektur Handbuch, Online-Hilfe; WarpIN-Skript Thomas Klein - Übersetzung Online-Hilfe; Korrektur Handbuch, Online-Hilfe Ingo Maurer - Übersetzung Online-Hilfe Ulrich Möller - Übersetzung Dialogressourcen, Handbuch, Online-Hilfe; Korrektur Dialogressourcen, Handbuch, Online-Hilfe Michael Riethdorf - Übersetzung Online-Hilfe; erste Versionen des WarpIN-Skripts Peter Weilbacher - Übersetzung Handbuch, Online-Hilfe 9. UNTERSTÜTZUNG UND SPENDEN ============================ XWorkplace und die Sprachunterstützungspakete basieren auf freiwilliger, ehrenamtlicher Arbeit. Wenn Sie die weitere Entwicklung unterstützen möchten, haben Sie folgende Möglichkeiten: - Spenden an den Maintainer dieses Pakets: Eine Auswahl möglicher Sachspenden finden Sie im "Wunschzettel" unter folgender Adresse: http://www.amazon.de/gp/registry/1IG0CF3GGYA9H - Spenden an Netlabs.org: Mensys B.V. bietet Sponsoreinheiten zum Online-Kauf unter folgender URL an: http://shop.mensys.nl/cgi-bin/db2www/mns_art2.d2w/report?catname=NETLABS Mit diesen Spenden werden z.B. wichtige Internet-Dienste wie das Quelltextarchiv (CVS), das die gemeinsame Arbeit am Projekt ermöglicht, und die Support-Mailinglisten finanziert. - Mitarbeit am Projekt: Neben der eigentlichen Entwicklung gehört hierzu auch die Pflege der Dokumentation, der Definitionsdateien für Treiber und WPS-Klassen, der Projekt-Web-Site sowie Hilfe für Anwender.

Installazione ============= Questo pacchetto contiene il supporto in lingua italiana (NLS) per la versione 1.0.16 di XWorkplace. Ultimo aggiornamento: 9 giugno 2008 Alla pagina "System Configuration", lasciando selezionata l'impostazione "Create WPS objects" WarpIN provvederà a tradurre automaticamente in italiano i nomi degli oggetti WPS di XWorkplace. Leggete in proposito il punto 2 in "Problemi noti e limitazioni". Si può ottenere in un secondo tempo lo stesso effetto dell'opzione "Create WPS objects" lanciando lo script REXX "instl039.cmd", nella sottocartella "install" del percorso di installazione di XWorkplace. All'inizio dell'installazione potrebbe presentarsi una finestra di errore dal titolo "File locked": selezionate "Unlock" per procedere. Al termine dell'installazione il supporto per la lingua italiana viene attivato automaticamente ed entra in uso al primo riavvio della WPS. Problemi noti e limitazioni =========================== 1. Per motivi di consistenza, la stringa identificativa del pacchetto per la lingua italiana è cambiata. Nel caso si fosse già installata una precedente versione di questo pacchetto, la voce relativa nel database di WarpIN non verrà sovrascritta dalla presente versione e, se lo si desidera, andrà rimossa manualmente. 2. Nella conversione in italiano dei nomi degli oggetti WPS relativi ad XWorkplace andranno perdute tutte le personalizzazioni, ad es. le voci di menu addizionali o i cambiamenti apportati alle stringhe di testo visualizzate nelle barre di stato (oggetto "Workplace Shell", pagina "Barre di stato - 2"). 3. Se si sceglie una lingua differente dall'oggetto "Impostazioni XWorkplace", è possibile che l'XCenter resti impostato sulla lingua precedente. Per risolvere il problema è sufficiente chiudere e riaprire l'XCenter. 4. Nell'oggetto "Kernel OS/2", la schermata di configurazione delle impostazioni per il file system JFS è in inglese (http://xtracker.netlabs.org/index.php?bug=690). 5. Il file .INF ("Guida ad XWorkplace") è, a differenza dell'aiuto in linea, scarsamente aggiornato. Può capitare di trovare riferimenti a tab, pagine impostazioni ed oggetti che non esistono più. In questi casi fate riferimento all'aiuto in linea, molto più esteso e sempre aggiornato. Restano valide ed utilissime tutte le pagine della Guida in cui si spiegano i meccanismi interni di XWorkplace e della WPS. Contatti ======== Per suggerimenti, correzioni, o anche solo per far sapere che avete apprezzato questo lavoro, scrivete all'indirizzo ggamba@tiscali.it! Esiste una mailing list in lingua inglese dedicata ad XWorkplace e comodamente leggibile con il proprio browser all'indirizzo: http://news.gmane.org/gmane.org.netlabs.xworkplace.general/ Per chi preferisse l'italiano, c'e' un gruppo di discussione dedicato ad OS/2: http://groups.google.it/group/it.comp.os.os2?hl=it Download ======== La versione più aggiornata del supporto in lingua italiana è sempre disponibile su Hobbes: http://hobbes.nmsu.edu/cgi-bin/h-search?sh=1&button=Search&key=xworkplace+italian Le versioni precedenti oltre che da Hobbes sono scaricabili dall'indirizzo: ftp://ftp.netlabs.org/pub/xworkplace/nls/ Il codice sorgente è disponibile come parte del sorgente di XWorkplace sul server CVS di Netlabs (sottocartella 039). Per informazioni su come accedere al codice sorgente, visitate la pagina http://www.xworkplace.org/cvs.html. Questa versione è identificata dal tag: ggamba_0004_1-0-8 I nomi ====== Di seguito sono elencati i nomi di tutti coloro che hanno contribuito a questo lavoro, o traducendo una parte delle risorse dall'inglese o segnalandoci errori e refusi. Se ci fossimo dimenticati di voi, scriveteci! Carlo <carlo_warp@yahoo.it> Gabriele Gamba <ggamba@tiscali.it> Loris Rinaldo <xloris@yahoo.com> Mentore Siesto <mentore.siesto@libero.it> Obelix <nbrion@box.seven.it> Come sostenere lo sviluppo di XWorkplace ======================================== XWorkplace e le sue traduzioni sono frutto di lavoro volontario. Per sostenerne l'ulteriore sviluppo: - collaborate al progetto: oltre al lavoro di programmazione vero e proprio, si può aiutare verificando ed ampliando la documentazione, contribuendo alle definizioni per i driver e le classi WPS come pure aiutando gli altri utenti in difficoltà. - fate una donazione a Netlabs.org: tramite Mensys B.V. è possibile acquistare online delle "sponsor unit" all'indirizzo: http://shop.mensys.nl/cgi-bin/db2www/mns_art2.d2w/report?catname=NETLABS Le donazioni aiutano a coprire le spese relative ai vari servizi (server CVS, pagine wiki, liste di discussione) che rendono possibile il lavoro di gruppo su questo progetto. Licenza e copyright =================== Copyright (C) 2002-2008 Gabriele Gamba, Mentore Siesto e altri. Questo programma è software libero; è lecito redistribuirlo o modificarlo secondo i termini della Licenza Pubblica Generica GNU, come riportata nel file COPYING presente nella cartella di installazione del programma. Il codice sorgente è interamente disponibile. Si veda il file XFLDR039.INF per i dettagli. Questo programma è distribuito nella speranza che sia utile, ma SENZA ALCUNA GARANZIA; senza neppure la garanzia implicita di NEGOZIABILITA' o di APPLICABILITA' PER UN PARTICOLARE SCOPO. Si veda il file XFLDR039.INF per i dettagli.

README.NLS - 日本語 (C) 2008 Alex Taylor INTRODUCTION このフャイルは XWorkplace の日本語の国籍言語のサポートを 含んでいます。 [まだ日本語で書かれません。] The original Japanese XWorkplace translation was done by Jun Mikami and can still be found at <http://www.geocities.co.jp/SiliconValley/1300/>. It does not appear to have been updated since version 1.0.1, however. Using these sources, I have updated it for XWorkplace 1.0.9. This mostly involved reorganizing the file contents slightly, but it did require the addition of a handful of new strings. (My Japanese is limited, so they may be slightly strange, but I tried to do my best.) KNOWN PROBLEMS AND LIMITATIONS At present, only the language DLL, the message file, and object creation are available in Japanese. The following are all still in English: * The help file and documentation (although I did update a couple of the more language-critical screenshots) * The WarpIN installer text. * The text used in the XFix utility. * The driver descriptions used in the Kernel object. * The WPS class descriptions used in the Class List object. * The README and README.NLS files. There is some slight text clipping visible in the WPS class list. As well, the vertical spacing in various dialogs will tend to be rather crowded if you have the desktop's default dialog font set to a smallish value like 9.WarpSans or 8.Helv. When the XPager is first enabled (or immediately following a reinstall), the desktop IME controls may not become "sticky" until you reboot. XWorkplace automatically sets the font on most of its dialogs to 9.WarpSans, instead of using the desktop's default dialog font. This means that DBCS glyphs will be displayed using Presentation Manager's automatic glyph substitution, instead of the "Combined" font glyphs. I have not observed any problems with this, but it is possible that it could affect the display quality of glyphs under some situations. You may see some garbled text in the Trash Can folder immediately after it is first created. As far as I can tell, this should go away once you reboot. REQUIREMENTS You should use this NLS package under the Japanese DBCS version of OS/2, with codepage 932 as the default. It will install and run under SBCS versions (like US English), but none of the Japanese text will be readable (unless you take some special and rather unorthodox steps which are really not recommended).

XWorkplace 1.0.15 README (C) Ulrich Möller, Feb 7, 2000 Last updated 2018-12-26 0. CONTENTS OF THIS FILE ======================== 1. INTRODUCTION 2. REQUIREMENTS 3. INSTALLATION 4. UPGRADING 5. NATIONAL LANGUAGE SUPPORT 6. GETTING STARTED 7. LICENSE, COPYRIGHT, DISCLAIMER 8. CONTACT 1. INTRODUCTION =============== Welcome to XWorkplace V1.0.15. XWorkplace is a complex set of replacement classes for the OS/2 Workplace Shell to enhance the WPS's behavior in many ways. XWorkplace comes in two flavors: the classic XWP Full version with all features and endless configuration options, or the newer Lite version that's preconfigured with the best of XWP. Most ArcaOS and eComStation installations include customized versions of XWP Lite, known as "ArcaDesktop" and "eWorkplace". Contact the respective vendor for updates to those versions. This README has additional information which is not included in the XWorkplace User Guide. Please read through all of this before installing. After installation, you can find this README in the main install directory. About this release ------------------ This release from the SVN 1.0 branch includes all enhancements and bugfixes currently available. For details, refer to the "Version Notices" in the "XWorkplace User Guide". To extract the documentation only, see "3. INSTALLATION" below. 2. REQUIREMENTS =============== XWorkplace is currently developed and tested under ArcaOS but should work with any of these versions of OS/2: -- Warp 4 FP 15 -- WarpServer for e-Business -- Merlin/Aurora Convenience Packages -- eComStation v1.x / v2.x -- ArcaOS v5.x Features that rely on ACPI (e.g. power-off or CPU temperature) require the system to use a compatible version of 'ACPI.PSD'. 3. INSTALLATION =============== XWorkplace must be installed using WarpIN. After all files have been copied, WarpIN will restart your Workplace Shell to make sure the changes become active. A reboot should not be necessary. The .WPI archive is structured as 3 packages: the "XWP kernel", language-support files, and documentation. While you would normally install all 3, you can choose just documentation or only language-support if desired. Some WARNINGS: -- In any case, before installing, MAKE A WPS BACKUP. -- It was reported that the Workplace Shell hangs after a restart if you have "Automatic lockup on startup" enabled. If so, disable that setting before allowing WarpIN to restart the WPS. 4. UPGRADING ============ An upgrade requires the WarpIN installer to replace files that are currently in use. When it asks about locked files, be sure to select "Unlock (DosReplaceModule)". If it reports that 'xwpdaemn.exe' is running and must be killed, allow it to do so. Should you get prompted that a .HLP file is locked, opening and closing WPS help will unlock it: click on the Desktop then press F1. Warning: killing 'xwpdaemn.exe' has the unfortunate side-effect of making all your XWorkplace Startup Folders start if you accept WarpIN's offer to restart the desktop at the end of installation, even if they are set to start on reboots only. If this is a problem, decline the offer to restart the Desktop, and reboot manually after installation has completed. If upgrading doesn't work, have WarpIN remove the installed XWorkplace version first, restart the WPS, and then install the new version. Upgrading ArcaDesktop and eWorkplace ------------------------------------ You may want to contact your vendor for their customized upgrade before installing a generic version of XWorkplace. If you choose to proceed, you can install either XWP Lite to get a comparable set of features or XWP Full for all features. Be aware that the icons and titles of some XWP objects may change. 5. NATIONAL LANGUAGE SUPPORT ============================ Xworkplace (Full and Lite) is currently distributed in seven NLS versions: German, Dutch, Italian, Japanese, Spanish, Russian, and English. To change your installation's language, reinstall using the desired NLS version but only select the language-support package. If you've installed XWP Full, you can use its "XWorkplace Setup" object to select any of the installed languages. Note: additional NLS versions containing only language-support files may be available from 3rd-parties. 6. GETTING STARTED ================== XWorkplace Full users should open the "XWorkplace Setup" object first. Go to the "Features" page to explore and enable XWorkplace. XWorkplace Lite comes preconfigured with most features enabled. For both versions, most settings are integrated into WPS objects in the System Setup folder; additional options can also be found in the pages of the Desktop's Properties notebook. 7. LICENSE, COPYRIGHT, DISCLAIMER ================================= Copyright (C) 1997-2021 Ulrich Möller, Martin Lafaix, Paul Ratcliffe, Rich Walsh, and others. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as contained in the file COPYING in the installation directory. The full source code is available. See XFLDR001.INF for details. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. For details, refer to the "Notices" section in XFLDR001.INF. 8. CONTACT ========== We have created two mailing lists at netlabs.org for contact. Please use these lists for general discussion about XWorkplace: For XWorkplace users: xworkplace-user@netlabs.org For XWorkplace developers and those who are interested: xworkplace-dev@netlabs.org For details, see "Notices" --> "Contact" in XFLDR001.INF. A bugtracker for XWorkplace is available at http://xtracker.netlabs.org Please use that beast for reporting bugs instead of posting them to the mailing lists. Thank you.

XWorkplace 1.0.14 README (C) Ulrich Möller, Feb 7, 2000 Last updated 2018-12-26 0. CONTENTS OF THIS FILE ======================== 1. INTRODUCTION 2. REQUIREMENTS 3. INSTALLATION 4. UPGRADING 5. NATIONAL LANGUAGE SUPPORT 6. GETTING STARTED 7. LICENSE, COPYRIGHT, DISCLAIMER 8. CONTACT 1. INTRODUCTION =============== Welcome to XWorkplace V1.0.14. XWorkplace is a complex set of replacement classes for the OS/2 Workplace Shell to enhance the WPS's behavior in many ways. XWorkplace comes in two flavors: the classic XWP Full version with all features and endless configuration options, or the newer Lite version that's preconfigured with the best of XWP. Most ArcaOS and eComStation installations include customized versions of XWP Lite, known as "ArcaDesktop" and "eWorkplace". Contact the respective vendor for updates to those versions. This README has additional information which is not included in the XWorkplace User Guide. Please read through all of this before installing. After installation, you can find this README in the main install directory. About this release ------------------ This release from the SVN 1.0 branch includes all enhancements and bugfixes currently available. For details, refer to the "Version Notices" in the "XWorkplace User Guide". To extract the documentation only, see "3. INSTALLATION" below. 2. REQUIREMENTS =============== XWorkplace is currently developed and tested under ArcaOS but should work with any of these versions of OS/2: -- Warp 4 FP 15 -- WarpServer for e-Business -- Merlin/Aurora Convenience Packages -- eComStation v1.x / v2.x -- ArcaOS v5.x Features that rely on ACPI (e.g. power-off or CPU temperature) require the system to use a compatible version of 'ACPI.PSD'. 3. INSTALLATION =============== XWorkplace must be installed using WarpIN. After all files have been copied, WarpIN will restart your Workplace Shell to make sure the changes become active. A reboot should not be necessary. The .WPI archive is structured as 3 packages: the "XWP kernel", language-support files, and documentation. While you would normally install all 3, you can choose just documentation or only language-support if desired. Some WARNINGS: -- In any case, before installing, MAKE A WPS BACKUP. -- It was reported that the Workplace Shell hangs after a restart if you have "Automatic lockup on startup" enabled. If so, disable that setting before allowing WarpIN to restart the WPS. 4. UPGRADING ============ An upgrade requires the WarpIN installer to replace files that are currently in use. When it asks about locked files, be sure to select "Unlock (DosReplaceModule)". If it reports that 'xwpdaemn.exe' is running and must be killed, allow it to do so. Should you get prompted that a .HLP file is locked, opening and closing WPS help will unlock it: click on the Desktop then press F1. Warning: killing 'xwpdaemn.exe' has the unfortunate side-effect of making all your XWorkplace Startup Folders start if you accept WarpIN's offer to restart the desktop at the end of installation, even if they are set to start on reboots only. If this is a problem, decline the offer to restart the Desktop, and reboot manually after installation has completed. If upgrading doesn't work, have WarpIN remove the installed XWorkplace version first, restart the WPS, and then install the new version. Upgrading ArcaDesktop and eWorkplace ------------------------------------ You may want to contact your vendor for their customized upgrade before installing a generic version of XWorkplace. If you choose to proceed, you can install either XWP Lite to get a comparable set of features or XWP Full for all features. Be aware that the icons and titles of some XWP objects may change. 5. NATIONAL LANGUAGE SUPPORT ============================ Xworkplace (Full and Lite) is currently distributed in six NLS versions: German, Dutch, Italian, Japanese, Spanish and English. To change your installation's language, reinstall using the desired NLS version but only select the language-support package. If you've installed XWP Full, you can use its "XWorkplace Setup" object to select any of the installed languages. Note: additional NLS versions containing only language-support files may be available from 3rd-parties. 6. GETTING STARTED ================== XWorkplace Full users should open the "XWorkplace Setup" object first. Go to the "Features" page to explore and enable XWorkplace. XWorkplace Lite comes preconfigured with most features enabled. For both versions, most settings are integrated into WPS objects in the System Setup folder; additional options can also be found in the pages of the Desktop's Properties notebook. 7. LICENSE, COPYRIGHT, DISCLAIMER ================================= Copyright (C) 1997-2018 Ulrich Möller, Martin Lafaix, Paul Ratcliffe, Rich Walsh, and others. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as contained in the file COPYING in the installation directory. The full source code is available. See XFLDR001.INF for details. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. For details, refer to the "Notices" section in XFLDR001.INF. 8. CONTACT ========== We have created two mailing lists at netlabs.org for contact. Please use these lists for general discussion about XWorkplace: For XWorkplace users: xworkplace-user@netlabs.org For XWorkplace developers and those who are interested: xworkplace-dev@netlabs.org For details, see "Notices" --> "Contact" in XFLDR001.INF. A bugtracker for XWorkplace is available at http://xtracker.netlabs.org Please use that beast for reporting bugs instead of posting them to the mailing lists. Thank you.

XWorkplace 1.0.13 (Jan 13, 2020) Except as noted, the changes listed below were contributed by Rich Walsh. New Features: * XShutdown XShutdown now provides a live Reboot List taken from your AirBoot/BootManager's menu. It is always up to date and requires no configuration (IBM BM support requires LVM). XShutdown's page in the Desktop's notebook has also been updated. * Pulse widget Pulse now offers two types of graph: the standard line graph, and a new color-coded moving bar graph that shows average load across all cores. Other improvements include a faster line graph and fixed-position display text that shows when a core is offline. * Spanish NLS Initial Spanish language support has been provided by Alfredo Fernández Díaz. * CPU Temperature widget this ACPI-based widget was provided by David Azarewicz. Updates and Bugfixes: * NLS -Lite versions will use the "LANG" environment variable to determine which NLS version to load; the behavior of XWP-Full is unchanged. - Language settings for all versions can be overridden by putting this in config.sys: "SET XWP_LANG=xxx" - where xxx is a 3-digit country code that XWP supports (e.g. 039) * XCenter -'Create new widget' has been added to all XCenter menus -fixed: font-size error in 'Diskfree (condensed)' widget * XView -fixed: Refresh/F5 failed to update Xview and all disks in any view - fixed: empty folders failed to display newly-added files * Class List -added descriptive entries for previously undocumented classes and updated existing descriptions (provided by Lewis Rosenthal) * Help -Lite builds now omit most pages that refer to features not included in LIte. * Install/Remove -changed default install directory to '$(WARPIN_DEFAULTTOOLSPATH)\xwps' from '$(WARPIN_DEFAULTTOOLSPATH)\WPS\XWorkplace' - after uninstalling XWP, the "System" object will be recreated in System Setup the next time the Desktop restarts - if 'pr1util.dll' is available, the deinstall script will use it to unreplace WPS classes

XWorkplace 1.0.13 (Jan 13, 2020) Except as noted, the changes listed below were contributed by Rich Walsh. New Features: * XShutdown XShutdown now provides a live Reboot List taken from your AirBoot/BootManager's menu. It is always up to date and requires no configuration (IBM BM support requires LVM). XShutdown's page in the Desktop's notebook has also been updated. * Pulse widget Pulse now offers two types of graph: the standard line graph, and a new color-coded moving bar graph that shows average load across all cores. Other improvements include a faster line graph and fixed-position display text that shows when a core is offline. * Spanish NLS Initial Spanish language support has been provided by Alfredo Fernández Díaz. * CPU Temperature widget this ACPI-based widget was provided by David Azarewicz. Updates and Bugfixes: * NLS -Lite versions will use the "LANG" environment variable to determine which NLS version to load; the behavior of XWP-Full is unchanged. - Language settings for all versions can be overridden by putting this in config.sys: "SET XWP_LANG=xxx" - where xxx is a 3-digit country code that XWP supports (e.g. 039) * XCenter -'Create new widget' has been added to all XCenter menus -fixed: font-size error in 'Diskfree (condensed)' widget * XView -fixed: Refresh/F5 failed to update Xview and all disks in any view - fixed: empty folders failed to display newly-added files * Class List -added descriptive entries for previously undocumented classes and updated existing descriptions (provided by Lewis Rosenthal) * Help -Lite builds now omit most pages that refer to features not included in LIte. * Install/Remove -changed default install directory to '$(WARPIN_DEFAULTTOOLSPATH)\xwps' from '$(WARPIN_DEFAULTTOOLSPATH)\WPS\XWorkplace' - after uninstalling XWP, the "System" object will be recreated in System Setup the next time the Desktop restarts - if 'pr1util.dll' is available, the deinstall script will use it to unreplace WPS classes

XWorkplace 1.0.13 (Jan 13, 2020) Except as noted, the changes listed below were contributed by Rich Walsh. New Features: * XShutdown XShutdown now provides a live Reboot List taken from your AirBoot/BootManager's menu. It is always up to date and requires no configuration (IBM BM support requires LVM). XShutdown's page in the Desktop's notebook has also been updated. * Pulse widget Pulse now offers two types of graph: the standard line graph, and a new color-coded moving bar graph that shows average load across all cores. Other improvements include a faster line graph and fixed-position display text that shows when a core is offline. * Spanish NLS Initial Spanish language support has been provided by Alfredo Fernández Díaz. * CPU Temperature widget this ACPI-based widget was provided by David Azarewicz. Updates and Bugfixes: * NLS -Lite versions will use the "LANG" environment variable to determine which NLS version to load; the behavior of XWP-Full is unchanged. - Language settings for all versions can be overridden by putting this in config.sys: "SET XWP_LANG=xxx" - where xxx is a 3-digit country code that XWP supports (e.g. 039) * XCenter -'Create new widget' has been added to all XCenter menus -fixed: font-size error in 'Diskfree (condensed)' widget * XView -fixed: Refresh/F5 failed to update Xview and all disks in any view - fixed: empty folders failed to display newly-added files * Class List -added descriptive entries for previously undocumented classes and updated existing descriptions (provided by Lewis Rosenthal) * Help -Lite builds now omit most pages that refer to features not included in LIte. * Install/Remove -changed default install directory to '$(WARPIN_DEFAULTTOOLSPATH)\xwps' from '$(WARPIN_DEFAULTTOOLSPATH)\WPS\XWorkplace' - after uninstalling XWP, the "System" object will be recreated in System Setup the next time the Desktop restarts - if 'pr1util.dll' is available, the deinstall script will use it to unreplace WPS classes

XWorkplace 1.0.13 (Jan 13, 2020) Except as noted, the changes listed below were contributed by Rich Walsh. New Features: * XShutdown XShutdown now provides a live Reboot List taken from your AirBoot/BootManager's menu. It is always up to date and requires no configuration (IBM BM support requires LVM). XShutdown's page in the Desktop's notebook has also been updated. * Pulse widget Pulse now offers two types of graph: the standard line graph, and a new color-coded moving bar graph that shows average load across all cores. Other improvements include a faster line graph and fixed-position display text that shows when a core is offline. * Spanish NLS Initial Spanish language support has been provided by Alfredo Fernández Díaz. * CPU Temperature widget this ACPI-based widget was provided by David Azarewicz. Updates and Bugfixes: * NLS -Lite versions will use the "LANG" environment variable to determine which NLS version to load; the behavior of XWP-Full is unchanged. - Language settings for all versions can be overridden by putting this in config.sys: "SET XWP_LANG=xxx" - where xxx is a 3-digit country code that XWP supports (e.g. 039) * XCenter -'Create new widget' has been added to all XCenter menus -fixed: font-size error in 'Diskfree (condensed)' widget * XView -fixed: Refresh/F5 failed to update Xview and all disks in any view - fixed: empty folders failed to display newly-added files * Class List -added descriptive entries for previously undocumented classes and updated existing descriptions (provided by Lewis Rosenthal) * Help -Lite builds now omit most pages that refer to features not included in LIte. * Install/Remove -changed default install directory to '$(WARPIN_DEFAULTTOOLSPATH)\xwps' from '$(WARPIN_DEFAULTTOOLSPATH)\WPS\XWorkplace' - after uninstalling XWP, the "System" object will be recreated in System Setup the next time the Desktop restarts - if 'pr1util.dll' is available, the deinstall script will use it to unreplace WPS classes

XWorkplace 1.0.13 (Jan 13, 2020) Except as noted, the changes listed below were contributed by Rich Walsh. New Features: * XShutdown XShutdown now provides a live Reboot List taken from your AirBoot/BootManager's menu. It is always up to date and requires no configuration (IBM BM support requires LVM). XShutdown's page in the Desktop's notebook has also been updated. * Pulse widget Pulse now offers two types of graph: the standard line graph, and a new color-coded moving bar graph that shows average load across all cores. Other improvements include a faster line graph and fixed-position display text that shows when a core is offline. * Spanish NLS Initial Spanish language support has been provided by Alfredo Fernández Díaz. * CPU Temperature widget this ACPI-based widget was provided by David Azarewicz. Updates and Bugfixes: * NLS -Lite versions will use the "LANG" environment variable to determine which NLS version to load; the behavior of XWP-Full is unchanged. - Language settings for all versions can be overridden by putting this in config.sys: "SET XWP_LANG=xxx" - where xxx is a 3-digit country code that XWP supports (e.g. 039) * XCenter -'Create new widget' has been added to all XCenter menus -fixed: font-size error in 'Diskfree (condensed)' widget * XView -fixed: Refresh/F5 failed to update Xview and all disks in any view - fixed: empty folders failed to display newly-added files * Class List -added descriptive entries for previously undocumented classes and updated existing descriptions (provided by Lewis Rosenthal) * Help -Lite builds now omit most pages that refer to features not included in LIte. * Install/Remove -changed default install directory to '$(WARPIN_DEFAULTTOOLSPATH)\xwps' from '$(WARPIN_DEFAULTTOOLSPATH)\WPS\XWorkplace' - after uninstalling XWP, the "System" object will be recreated in System Setup the next time the Desktop restarts - if 'pr1util.dll' is available, the deinstall script will use it to unreplace WPS classes